Using the optical properties of aerosols from the AERONET database to calculate surface solar UV-B irradiance in Córdoba, Argentina: Comparison with measurements

The main purpose of this study was to perform an evaluation of the particles’ optical parameters’ influence on surface solar UV-B (280–315 nm) irradiance in Córdoba, Argentina. To achieve this objective UV-B irradiance dataset, AERONET (AErosol RObotic NETwork) database, and TUV (Tropospheric Ultraviolet and Visible) model were used to analyze the effects of aerosols on surface irradiance on cloudless days during specific days of winter and spring of the period 1999–2006. Together with a direct observer, total irradiance (300–3000 nm) measurements were used as an ancillary tool to verify the cloudless condition. Every year, during this period, important reductions in surface irradiance are observed due to the aerosol load. Aerosols were incorporated in the model through the aerosol optical depth at 340 nm, the asymmetry parameter at 440 nm, and the single scattering albedo at 440 nm, all of them provided by AERONET Córdoba-CETT site. These factors vary from near to zero up to 1.4, from 0.56 up to 0.83 and from 0.43 up to 0.99, respectively. The behaviors of these factors along the year are analyzed considering the meteorology of Córdoba. When AERONET data are included in the TUV model they allow an accurate simulation of the UV-B irradiance, making the agreement with the experimental measurements substantially better. Only a small differences (±2%) remains, which can be attributed to diverse factors. As the AERONET site is 20 km away from the irradiance measurement site, these results show the regional character of the aerosols in Córdoba, although small contributions of urban aerosols are not discarded. An episode of high aerosol and pollutants laden due to fires in the surrounding hills is briefly analyzed. A set of additional studies are needed to describe comprehensively the characteristics and behavior of the Córdoba aerosols. Some of them are being already carried out.     

Volcanic sulphate and arctic dust plumes over the North Atlantic Ocean

High time resolution aerosol mass spectrometry measurements were conducted during a field campaign at Mace Head Research Station, Ireland, in June 2007. Observations on one particular day of the campaign clearly indicated advection of aerosol from volcanoes and desert plains in Iceland which could be traced with NOAA Hysplit air mass back trajectories and satellite images. In conjunction with this event, elevated levels of sulphate and light absorbing particles were encountered at Mace Head. While sulphate concentration was continuously increasing, nitrate levels remained low indicating no significant contribution from anthropogenic pollutants. Sulphate concentration increased about 3.8 μg m⁻³ in comparison with the background conditions. Corresponding sulphur flux from volcanic emissions was estimated to about 0.3 TgS yr⁻¹, suggesting that a large amount of sulphur released from Icelandic volcanoes may be distributed over distances larger than 1000 km. Overall, our results corroborate that transport of volcanogenic sulphate and dust particles can significantly change the chemical composition, size distribution, and optical properties of aerosol over the North Atlantic Ocean and should be considered accordingly by regional climate models.     

Evolutionary processes and sources of high-nitrate haze episodes over Beijing, Spring

Rare and consecutive high-nitrate haze pollution episodes were observed in Beijing in spring2012. We present detailed characterization of the sources and evolutionary mechanisms of this haze pollution, and focus on an episode that occurred between 15 and 26 April. Submicron aerosol species were found to be substantially elevated during haze episodes, and nitrates showed the largest increase and occupation(average: 32.2%) in non-refractory submicron particles(NR-PM_1), which did not occur in other seasons as previously reported. The haze episode(HE) was divided into three sub-episodes, HEa, HEb, and HEc. During HEa and HEc, a shallow boundary layer, stagnant meteorological conditions, and high humidity favored the formation of high-nitrate concentrations, which were mainly produced by three different processes —daytime photochemical production, gas-particle partitioning, and nighttime heterogeneous reactions — and the decline in visibility was mainly induced by NR-PM_1.However, unlike HEa and HEc, during HEb, the contribution of high nitrates was partly from the transport of haze from the southeast of Beijing — the transport pathway was observed at ~800–1000 m by aerosol Lidar —and the decline in visibility during HEb was primarily caused by PM_(2.5). Our results provide useful information for air quality improvement strategies in Beijing during Spring.     

Infrared spectroscopic probing of dimethylamine clusters in an Ar matrix

Amines have many atmospheric sources and their clusters play an important role in aerosol nucleation processes. Clusters of a typical amine, dimethylamine (DMA), of different sizes were measured with matrix isolation IR (infrared) and NIR (near infrared) spectroscopy. The NIR vibrations are more separated and therefore it is easier to distinguish different sizes of clusters in this region. The DMA clusters, up to DMA tetramer, have been optimized using density functional methods, and the geometries, binding energies and thermodynamic properties of DMA clusters were obtained. The computed frequencies and intensities of NH-stretching vibrations in the DMA clusters were used to interpret the experimental spectra. We have identified the fundamental transitions of the bonded NH-stretching vibration and the first overtone transitions of the bonded and free NH-stretching vibration in the DMA clusters. Based on the changes in vibrational intensities during the annealing processes, the growth of clusters was clearly observed. The results of annealing processes indicate that DMA molecules tend to form larger clusters with lower energies under matrix temperatures, which is also supported by the calculated reaction energies of cluster formation.     

Analysis of the origin of peak aerosol optical depth in springtime over the Gulf of Tonkin

By aggregating MODIS(moderate-resolution imaging spectroradiometer) AOD(aerosol optical depth) and OMI(ozone monitoring instrument) UVAI(ultra violet aerosol index)datasets over 2010–2014, it was found that peak aerosol loading in seasonal variation occurred annually in spring over the Gulf of Tonkin(17–23°N, 105–110°E). The vertical structure of the aerosol extinction coefficient retrieved from the spaceborne lidar CALIOP(cloud-aerosol lidar with orthogonal polarization) showed that the springtime peak AOD could be attributed to an abrupt increase in aerosol loading between altitudes of 2 and 5 km.In contrast, aerosol loading in the low atmosphere(below 1 km) was only half of that in winter. Wind fields in the low and high atmosphere exhibited opposite transportation patterns in spring over the Gulf of Tonkin, implying different sources for each level. By comparing the emission inventory of anthropogenic sources with biomass burning, and analyzing the seasonal variation of the vertical structure of aerosols over the Northern Indo-China Peninsula(NIC), it was concluded that biomass burning emissions contributed to high aerosol loading in spring. The relatively high topography and the high surface temperature in spring made planetary boundary layer height greater than 3 km over NIC. In addition, small-scale cumulus convection frequently occurred, facilitating pollutant rising to over 3 km, which was a height favoring long-range transport. Thus, pollutants emitted from biomass burning over NIC in spring were raised to the high atmosphere, then experienced long-range transport, leading to the increase in aerosol loading at high altitudes over the Gulf of Tonkin during spring.     

Investigation on condensable particulate matter emission characteristics in wet ammonia-based desulfurization system

Particulate matter emissions from ammonia-based wet flue gas desulfurization (Ammonia-WFGD) systems are composed of a filterable particulate matter and a condensable particulate matter (CPM) portion. However, the CPM part has been ignored for a long time, which results in an underestimation of the aerosol problems caused by Ammonia-WFGD systems. In our research, the characteristics of the CPM that emits from an Ammonia-WFGD system are investigated experimentally for the first time, with the US Environmental Protection Agency Method 202 employed as the primary measurement. The influences of some essential desulfurizing parameters are evaluated based on the experimental data. The results show that CPM contributes about 68.8% to the total particulate matter emission. CPM consists mainly of ammonium sulfates/sulfites, with the organic part accounting for less than 4%. CPM is mostly in the submicron fraction, about 71.1% of which originates from the NH₃–H₂O–SO₂ reactions. The appropriate adjustments for the parameters of the flue gas and the desulfurizing solution can inhibit CPM formation to different extents. This indicates that the parameter optimizations are promising in solving CPM emission problems in Ammonia-WFGD systems, in which the pH adjustment alone can abate CPM emission by around 49%. The opposite variations of the parameters need attention because they can cause tremendous CPM emission increase.     

Physicochemical and toxicological characteristics of nanoparticles in aerosols in southern Thailand during recent haze episodes in lower southeast Asia

Transboundary haze from biomass burning is one of the most important air pollutions in Southeast Asia. The most recent serious haze episode occurred in 2015. Southern Thailand was affected by the haze during September to October when the particulate matter concentration hit a record high. We investigated physical and chemical characteristics of aerosols, including concentration and aerosol size distribution down to sub-micron sizes during haze episodes in 2013 and 2015 and, for reference, an insignificant haze period in 2017. The highest total suspended particulates and PM₁₀ levels in Hat Yai city were 340.1 and 322.5 µg/m³. The mass fractions were nanoparticles (< 100 nm) 3.1%-14.8% and fine particles (< 1 µm) 54.6%-59.1%. Polycyclic aromatic hydrocarbon size distributions in haze periods peaked at 0.75 µm and the concentrations are 2-30 times higher than the normal period. High molecular weight (4-6 ring) PAHs during the haze episode contribute to about 56.7%-88.0% for nanoparticles. The average values of benzo(a)pyrene toxic equivalency quotient were 3.34±2.54ng/m³ in the 2015 haze period but only 0.89±0.17 ng/m³ in 2017. It is clear that particles smaller than 1 µm, were highly toxic. Nanoparticles contributed 19.4%-26.0% of total BaP-TEQ, whereas the mass fraction is 13.1%-14.8%. Thus the nanoparticles were more carcinogenic and can cause greater health effect than larger particles. The fraction of BaP-TEQ for nanoparticles during 2017 non-haze period was nearly the same, while the mass fraction was lower. This indicates that nanoparticles are the significant source of carcinogenic aerosols both during haze and non-haze periods.     

Analysis of PCDD/Fs and dioxin-like PCBs in atmospheric deposition samples from the Flemish measurement network: Optimization and validation of a new CALUX bioassay method

Since the CALUX (Chemically Activated LUciferase gene eXpression) bioassay is a fast, sensitive and inexpensive tool for the analysis of a high number of samples, validation of new methods is urgently needed. In this study, a new method for the analysis of PCDD/Fs and dioxin-like PCBs in atmospheric deposition samples with the CALUX bioassay was developed, optimized and validated. The method consists of 4 steps: filtration, extraction, clean up and bioassay analysis. To avoid the use of large amounts of toxic solvents, new techniques were used for filtration and extraction: a C18 filter was used instead of a liquid/liquid extraction and an Accelerated Solvent Extractor (ASE) was used instead of the traditional soxhlet extraction. After pre-oxidation of the sample extract, clean up was done using a multi-layer silica gel column coupled to a carbon column. The PCDD/F and PCB fractions were finally analyzed with the H1L7.5c1 and/or the H1L6.1c3 mouse hepatoma cell lines. The limit of quantification was 1.4 pg CALUX-BEQ m⁻² d⁻¹ for the PCBs and 5.6 pg CALUX-BEQ m⁻² d⁻¹ for the PCDD/Fs, when using the new sensitive H1L7.5c1 cell line. The GC-HRMS recovery for all PCDD/F congeners was between 55% and 112%, with a mean recovery of 90%. CALUX recoveries of spiked procedural blanks were between the accepted ranges of 80-120%. Repeatability and reproducibility were satisfactory and no interferences from metals were detected. The first results from the Flemish measurement program showed good correlation between CALUX and GC-HRMS.     

Do aerosols act as catalysts in the OH radical initiated atmospheric oxidation of volatile organic compounds?

Smog chamber/FTIR techniques were used to study the relative reactivity of OH radicals with methanol, ethanol, phenol, C₂H₄, C₂H₂, and p-xylene in 750 Torr of air diluent at 296±2 K. Experiments were performed with, and without, 500–8000 μg m⁻³ (4000–50 000 μm² cm⁻³ surface area per volume) of NaCl, (NH₄)₂SO₄ or NH₄NO₃ aerosol. In contrast to the recent findings of Oh and Andino (Atmospheric Environment 34 (2000) 2901, 36 (2002) 149; International Journal of Chemical Kinetics 33 (2001) 422) there was no discernable effect of aerosol on the rate of loss of the organic compounds via reaction with OH radicals. Gas kinetic theory arguments cast doubt upon the findings of Oh and Andino. The available data suggest that the answer to the title question is “No”. As part of this work the rate constants for reactions of OH radicals with methanol, ethanol, and phenol in 750 Torr of air at 296 K were determined to be: k_OH+CH3OH=(8.12±0.54)×10⁻¹³, k_OH+C2H5OH=(3.47±0.32)×10⁻¹² and k_OH+phenol=(3.27±0.31)×10⁻¹¹ cm³ molecule⁻¹ s⁻¹.     

测定气溶胶灭火剂产物PH值的新方法

气溶胶灭火剂是高效灭火剂，气溶胶灭火剂产物PH值测量对新型气溶胶灭火剂的开发有指导作用。与传统方法不同，本方法测量出的PH值具有唯一性，即每种气溶胶灭火剂产物的PH测定值与气溶胶灭火剂产物的组成有关而与吸收水量、吸收时间、气溶胶的留空时间无关。该方法能更好的比较不同气溶胶灭火剂产物间的酸碱度。